In this work, silver nanoparticles (AgNPs) obtained from photographic waste were synthesized and electrodeposited via cyclic voltammetry using epoxy-graphite composite as an electrochemical substrate. Both electrodes, unmodified (Epoxy/C) and modified (Epoxy/C/AgNPs), were characterized electrochemically by electrochemical impedance spectroscopy (EIS), charge transfer constant (K0), and electroactive area. The modified electrode provided lower charge transfer resistance (275 Ω), more kinetically favored electron transfer (K0 = 1.15 × 10-3 cm s-1), and a 1.7-fold increase in the active area compared to the unmodified electrode. Additional characterizations by scanning electron microscopy (SEM) and Raman spectroscopy confirmed the presence of AgNPs structures on the carbonaceous surface. As a proof of concept, Pb2+ was used as a model analyte, and a square wave anodic stripping voltammetry (SWASV) method was developed to evaluate the analytical performance of both electrodes. A wider linear range (4.0 to 40.0 µg L-1), the appropriate limit of detection (1.2 µg L-1), and a 6-fold increase in sensitivity were found using the modified electrode, suggesting that the AgNPs significantly contributed to the performance of the electrode. The proposed method was applied to three real water samples, where the Pb2+ levels varied from 11.3 to 19.5 µg L-1. The proposed protocol (reuse of silver waste) has proven to be a powerful tool for improving the detection of Pb2+, which can be helpful for other electrochemical sensing applications in locations with minimal infrastructure.

Additive manufacturing is an emerging tool that has contributed to the sustainable fabrication of devices in several areas based on the concept of “zero waste”. Considering extrusion-based manufacturing (or 3D printing), polylactic acid (PLA) has been highlighted due to its biodegradability, obtention from renewable sources, and compatibility for 3D printing. Composites of PLA with conducting fillers, such as carbon-black (CB/PLA), are commercially-available and compatible with extrusion-based 3D printers and 3D pen. Herein, we investigate the electrochemical behavior of several antioxidant species (catechol, hydroquinone, propyl-gallate, octyl-gallate, dopamine, gallic acid and pyrogallol (PY)) on 3D-printed electrodes. Experiments by cyclic voltammetry demonstrated that electrochemical surface treatment in NaOH aqueous solution is an important strategy to improve the response of all antioxidants. Thus, PY was selected to evaluate the analytical performance of the proposed 3D-printed sensor. For this, a fast and simple method using batch-injection analysis with amperometric detection (BIA-AD) has been developed, which showed a limit of detection of 0.15 µmol L-1, wide linear range (0.5 to 300 µmol L-1), good precision (relative standard deviation (RSD) < 3.4%) and selectivity. This method was applied in biodiesel samples, after dilution (400-fold) in electrolyte. Recovery percentages ranging from 82 to 119% attested absence of matrix effect and good accuracy.

In this paper, a simple, sensitive and precise electroanalytical method was developed using a chemically-reduced graphene-oxide (CRGO)-modified glassy carbon electrode and square wave voltammetry (SWV) for determination of ciprofloxacin in pharmaceutical formulations (tablets) and milk samples. Advantages of this sensor include a potential displacement of 100 mV and a 5-fold current increase for the electrochemical oxidation of ciprofloxacin, which resulted in a highly sensitive sensor, when compared to unmodified electrode. The improved properties of the modified electrode are likely due to the formation of a porous surface evidenced by the change in electrode kinetics (thin-layer diffusion process). The proposed sensor is free from interference of sample matrix (pharmaceutical formulations and low/high-fat milk) avoiding cumbersome processes such as previous separations, solvent extraction, or sample filtration (samples were only diluted in Britton-Robinson buffer solution). The results by SWV showed a limit of detection of 0.21 µmol L-1 (correspondent to 0.069 mg L-1), which is lower than the ones obtained using other carbon-based electrodes, relative standard deviations lower than 12%, and satisfactory recoveries in the range from 84 to 109%. The results obtained were statistically similar (95% confidence level) with those performed through high-performance liquid chromatography (HPLC).